Have a look at
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=7994049477&fromMakeTrack=true
A CNC "Staging Brake". This must be the easiest way for any non-technical person to fit a hydraulic handbrake to their car. Everthing is included in the kit, all you have to is decide where to fit it, cut into the front to rear brake line, flare and attach the cut ends to the cylinder, bleed the brakes and go. With one of these you can hold the car on a one in nothing with just your finger tips. Makes restarts and reversing back a breeze (not that I ever have to do that!). As used by Simon Woodall, Ade Marfell, Hans Viertel and others.
I'm not saying mine is good, but a sharp tug will lock the rear wheels at 30mph.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=7994049477&fromMakeTrack=true
A CNC "Staging Brake". This must be the easiest way for any non-technical person to fit a hydraulic handbrake to their car. Everthing is included in the kit, all you have to is decide where to fit it, cut into the front to rear brake line, flare and attach the cut ends to the cylinder, bleed the brakes and go. With one of these you can hold the car on a one in nothing with just your finger tips. Makes restarts and reversing back a breeze (not that I ever have to do that!). As used by Simon Woodall, Ade Marfell, Hans Viertel and others.
I'm not saying mine is good, but a sharp tug will lock the rear wheels at 30mph.
(e-bay item number 7994049477 if the link doesn't work)
No comments:
Post a Comment