mgbob is Bob Slatter of Plymouth, MCC, MG Car Club and Launceston and North Cornwal Motor Club member. Chief Marshal of Simms and Lands End Cornwall Start for several years.
Hope this helps and thanks for all the info on the sight. Keep up the good work
Hi don't know whether I caused confusion by reloading the picture of my Pop "Gruyere" (the ex John Hayes car) now back on the road after an extensive engine rebuild and being gently run in for the next 500 miles at max 30 mph - you'll be able to follow my progress on the Bristol area traffic news! After that we look forward to a return "to the hills".
Mike - If you are concerned about only half of your picture appearing I think its because the original was a large size, hi res. Then part of the picture got lost in the reduction process. The solution is to reduce size first. Let me know if you need any help with this - Michael
I am the same Jonnie who posted a Marlin on ebay in November.
ReplyDeleteJonnie Woodall, Shrewsbury, Shropshire
Cheers
Thanks for all your hard work setting this up. I'm only lurking at present, because of too many other pressing interests, but one day maybe....
ReplyDeleteHi Mike
ReplyDeletemgbob is Bob Slatter of Plymouth, MCC, MG Car Club and Launceston and North Cornwal Motor Club member. Chief Marshal of Simms and Lands End Cornwall Start for several years.
Hope this helps and thanks for all the info on the sight. Keep up the good work
Rgeards
Bob Slatter
insertMulTV('classicaltrials:video:5','upload-classicaltrials-5','',1,1);
ReplyDeleteHi don't know whether I caused confusion by reloading the picture of my Pop "Gruyere" (the ex John Hayes car) now back on the road after an extensive engine rebuild and being gently run in for the next 500 miles at max 30 mph - you'll be able to follow my progress on the Bristol area traffic news! After that we look forward to a return "to the hills".
ReplyDeleteBest regards,
Mike Jones
Mike - If you are concerned about only half of your picture appearing I think its because the original was a large size, hi res. Then part of the picture got lost in the reduction process. The solution is to reduce size first. Let me know if you need any help with this - Michael
ReplyDelete