Thursday 31 July 2008

Bead breaker

I notice that someone is selling FIVE of these bead breakers on Ebay, not cheap at 짙69 each but useful if you are into that sort of thing. I suppose it would pay for itself in 14 tyre swaps, the YellerDutton is pretty kind to tyres but we still got through one per event in the past season. Hmmm...
TTFN
John Rhodes

19 comments:

  1. It item no 350080065025 for those that are interested, and if you are have a look at item 320281012368.  A Stenor Bead Breaker, just about the best arround, and carried by many trials folk, including myself.

    ReplyDelete
  2. Thers another Stenor Bead Breaker on Ebay Item 200257489623   or   Click here   Michael

    ReplyDelete
  3. Just seen another one EBay Item 250310921522   http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=250310921522   Its' under 10 Quid at the moment.

    ReplyDelete
  4. Yes, and it's my ten quid. Gerrof.
     
    TTFN, John Rhodes
    (Yeller Dutton)

    ReplyDelete
  5. The last one went for aboot 50 - Michael

    ReplyDelete
  6. Not sure why this is so useful:   is it so a flat can be repaired on the trial? or is it to use in the garage at home?   In the latter case the SEaley TC960 is excellent, bolts to the garage floor, includes a bead breaker, see ebay 370088874662 (how do I do a link to a web site on this forum??)

    ReplyDelete
  7. Richard,   A lot of triallers carry a Stenor, Dunlop or similar so they can get the tyre of the rim to change a tube during the trial. With a lot of wheels with deep safety rims it is very difficult to break the bead without a breaker. On my Beetle I have tried running over the tyre, using a jack etc to no avail.

    ReplyDelete
  8. Richard.   I have a spare Stenor if you are tempted! Makes excellent ballast. Yours for 짙35 to save me putting it on eBay.   Nigel

    ReplyDelete
  9. Hi Nigel,

    If Richard doesn't want it I will happily save you the hassle of putting it on eBay

    James

    ReplyDelete
  10. Hello James. I'll give Richard a call to see if he has seen my offer (he lives just 12 miles away) and certainly if he's not interested I'll let you know. Watch this space - as they say.

    ReplyDelete
  11. Nigel   Tried to call you can you give me a ring please, number as VSCC list   Thanks   Richard

    ReplyDelete
  12. Hello James.   The Stenor breaker is yours if you want it - for 짙35 as mentioned earlier. Whereabouts are you geographically? Clearly postage would be high because of the weight. Are you doing the Allen Trial - as there may be a way of getting it to the start via friends from Stroud ?   Regards       Nigel

    ReplyDelete
  13. Hi Nigel,

    Thats great, yes I'm entered for the Allen and as long as I can fit a new clutch release bearing by Saturday then I will be there! I'm based near Reading in Berkshire so not very geographically helpful.

    Thanks

    James

    ReplyDelete
  14. There's another Stenot on RBay. It's at 짙0.99!   http://cgi.ebay.co.uk/STENOR-MANUAL-TYRE-BEAD-BREAKER_W0QQitemZ370110484027QQcmdZViewItem?hash=item370110484027&_trksid=p3286.c0.m14&_trkparms=72%3A1345%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318

    ReplyDelete
  15. I'm planning to do the Allen if I can be of help

    ReplyDelete
  16. Thanks Richard for that offer. I plan to be in Stroud the weekend before the Allen and pass the breaker to a S&DMC member but if that changes I'll be in touch.   If Jim goes down with the 'flu or whatever, you can use me as a substitute bouncer ! The Allen has long been a favourite of mine, an excellent traditional trial.

    ReplyDelete
  17. Hi James.   This site won't give me your email address at the moment.   Here's mine >     npmbrown.allard (at) virgin.net   If you contact me I'll give you my postal address to send the money for the bead-breaker that Ian Moss kindly took down to the Allen Trial.    

    ReplyDelete
  18. Hi Nigel,

    Email on the way, apologies for the delay, most of last week/weekend was spent clambering up and down Welsh valleys following rally cars around!

    James

    ReplyDelete